Diesel Fuel Filter (10 Micron / Clear Bowl & Heat Shield)
Our web site is the most up-to-date source of information at your fingertips and we hope you find it easy to navigate. However, our team are available Monday to Friday 9am to 5pm to take your calls and assist you in finding the right solution.The Racor 500MA diesel fuel filter is designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and to protect precision engine components from dirt, rust, algae, asphaltenes, varnishes, and especially water, which is prevalent in engine fuels.
The Racor 500MA removes contaminants from fuel using the following legendary 3 stage process:
Stage One: Separation: - As fuel enters the fuel filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing: - Small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage Three: Filtration: - Proprietary Aquabloc II cartridge elements repel water and remove contaminants from fuel down to 10 micron (nominal). They are waterproof and effective longer than water absorbing elements.
Racor 500MA diesel fuel filter, with a see-through bowl, heat deflection shield and 10 micron element fitted. Part of the Parker Racor marine turbine series of fuel filters.
Replacement Racor turbine elements (2010 series) are available to order with various micron ratings. Racor 2010 turbine elements measure 78mm diameter x 70mm high.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Ask a question about Diesel Fuel Filter (10 Micron / Clear Bowl & Heat Shield)