BILT HAMBER AUTO CLAY - Regular

Auto-clay provides a method of removing harmful contamination from vehicle paint finishes, improving its durability and increasing the gloss level of subsequent waxes.

Contamination can consist of tiny metallic particles from rail dust, brake dust and industrial fallout; or non-metallic substances such as tree sap, bird droppings or insect residue. It affects all paint finishes and can cause serious damage when left untreated. Surprisingly, even brand-new cars and trucks can suffer from paint contamination.

Metallic contamination is perhaps the worst offender; whilst stuck into the paint surface it corrodes and expands leading to the onset of paint film destruction. Paint contamination can be felt as a rough or gritty texture on the freshly cleaned paint's surface. To assess the degree of contamination on you car's finish simply rub your fingers gently over the freshly washed paint - to magnify the sensation place a piece of cellophane beneath your finger tips and gently rub back and forth - if your paint needs to be clayed you will feel the gritty texture. It is usual to find that horizontal panels such as bonnet roof and boot lid are the most affected.

Clay bar removes these particles effortlessly from contaminated surfaces leaving a glass smooth ultra clean finish perfectly prepared for the application of autobalm gloss protection system. A clay prepared paint surface is not only free of damaging particles but will provide better shine and durability when treated with Auto-balm.

A Comparison

Competing clays require the use of special lubricants. Bilt-Hamber Laboratories Auto-clay differs as its formulation enables normal tap water to provide the necessary lubrication. Some clay bars contain surfactants such as powdered detergents or soaps. Long-term use of surfactants can have adverse effects on paint systems - Auto-clay contains no surfactants detergents soaps or other soluble materials.

Grit contamination cannot be removed by washing, waxing and/or polishing. Cutting compounds remove a thin layer of paint but still leave the grit behind.

"...looks more like a large square of plasticine but it makes an excellent job of removing surface debris, without resorting to harsh abrasives that actually eat into the paintwork.

Auto-clay is the first one we’ve tried that can be used with water.  Most need a special lubricant.  We were surprised to find it more effective than the others too, as it looks and fells almost identical."
Car Mechanics, July 2005

• Before using auto-clay thoroughly wash your car to remove any loose dirt.
• Direct sunlight should not fall on your car’s surface, and it’s best if the work area is relatively cool, but not cold.
• To use auto-clay spray water with a plant mister on a small area of your car and rub the bar back and forth with light pressure.
• Auto-clay should glide across your paint, keep the paint surface wetted thoroughly.
• Auto-clay must not be used dry.
• Listen carefully - at first you will hear the bar as it pulls the particles away from the paint, the noise and friction will disappear quickly.

Please use this form to ask a question about BILT HAMBER AUTO CLAY - Regular

Name:
Email address:
Telephone number:
Details:
Security code: