Electric Oil Pump 220v (9lpm/10bar)
Internal gear electric pump for lubricants. 220V motor, IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve.
Motor with mounting bracket, the pump can be mounted horizontally on a flat surface or vertically on a wall.
Recommended for use in small distribution systems with one outlet (delivery hose or hose reel with hose end meter).
Electric motor power 600 W (0.8 HP)
Nominal delivery, continuous duty 9 l/m (2.4 gpm)
Maximum fluid pressure 10 bar (145 psi)
Maximum suction lift 2.5 m (8.3')
Fluid Inlet /outlet threads 3/4" BSP (F) and flange coupling
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Ask a question about Electric Oil Pump 220v (9lpm/10bar)