Electric Oil Pump With Pressure Switch 220v (9lpm/9.5bar)
Internal gear electric pump for lubricants. 220 V, IP-55 protection motor with on/off switch.
Cast iron pump body, sintered steel gears and by-pass valve. Motor with mounting bracket, the pump can be mounted horizontally on a flat surface or vertically on a wall.
Pump includes an electronic pressure switch that automatically starts the pump once a delivery gun is opened. Once the gun is closed and the pressure has built again in the circuit, then the pressure switch stops the pump.
Includes a 220 V - 600 W electric motor with 2 m cable. Recommended for use in small distribution system with one outlet (delivery hose or hose reel with hose end meter).
Electric motor power 600 W (0.8 HP)
Nominal delivery, continuous duty 9 l/m (2.4 gpm)
Maximum fluid pressure 9.5 bar (135 psi)
Shut off pressure 10 bar (145 psi)
Start pressure 6 bar (85 psi)
Fluid Inlet thread 3/4" BSP (F) and flange coupling
Fluid outlet thread 1" BSP (F)
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Ask a question about Electric Oil Pump With Pressure Switch 220v (9lpm/9.5bar)